4 en | Table of Contents VG4 Modular Camera Series
F.01U.216.010 | 8.0 | 2011.02 Installation Manual Bosch Security Systems, Inc.
3.4.3 Power Supply Box Connections 54
3.5 Installing the VG4-A-9230 Roof Parapet Mount 55
3.6 Installing the VG4-A-9543 Pipe Mount 58
3.7 Wire the Pipe Interface Board 59
3.7.1 Wiring for Multiple AutoDomes 60
3.7.2 Connecting Wires to the Pipe Interface Board 60
3.8 Assemble the Pendant in Packing Box 62
3.9 Attach Pendant to Pipe and Tighten 64
3.10 Make Connections in the Power Supply Box 65
3.10.1 Connections for Fiber Optic Models 65
3.11 Installing the Pressurized Environmental Housing 67
3.11.1 Important Installation Safeguards 67
3.11.2 VG4 Pressurized Environmental Housing 67
3.11.3 VG4 Pressurized Environmental Mounting Options 68
3.11.4 Required Equipment 69
3.11.5 Attaching the Housing to the Pipe 70
3.11.6 Make Connections in the Power Supply Box 71
3.11.7 Calibrating the Pressure Sensor 72
3.11.8 Attaching the Bubble to the Housing 73
3.11.9 Pressurizing the Housing 75
3.11.10 Servicing the Pressurized Environmental Housing installation 75
4 Installing the In-Ceiling Mount 76
4.1 Unpacking 76
4.1.1 Parts List 76
4.1.2 Description 77
4.1.3 Tools Required 77
4.2 Pre-installation Check List 78
4.3 Dimensions 78
4.4 Prepare Drywall Ceiling for Installation 79
4.5 Prepare Suspension Ceiling for Installation 79
4.6 Wire the Interface Box 80
4.6.1 Interface Box Connections 82
4.7 Attach Housing to the Interface Box 83
4.8 Secure Housing to Ceiling 85
4.9 Align and Install Camera Module 86
4.10 Attach Bubble 86
5 Cable and Wire Standards 88
5.1 Power 88
5.2 Wire Distance Guide for Pendant 88
5.3 Video and Control Cables 89
5.4 Control-only Cables 91
5.5 Fiber Optic Module with an RS232/RS422 Controller 95
5.5.1 Connecting to an LTC 4629 Head End Data/Video Transceiver 95
5.5.2 Configuring the VG4 AutoDome 95
5.6 Audio Cables 97
To Next Page
Loading...
Need help?
General
