VG4 Modular Camera Series Table of Contents | en 3
Bosch Security Systems, Inc. Installation Manual F.01U.216.010 | 8.0 | 2011.02
Table of Contents
1Safety 6
1.1 Important Safety Instructions 6
1.2 Safety Precautions 8
1.3 Important Safeguards for Pressurized Units 8
1.4 Important Notices 8
1.5 Customer Support and Service 12
2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 13
2.1 Unpacking 13
2.1.1 Parts List 13
2.1.2 Description 15
2.1.3 Tools Required 15
2.2 Pre-installation Checklist 15
2.3 Mount Power Supply Box 16
2.4 Route Wires and Attach Connectors 17
2.4.1 Power Supply Box Connections 20
2.5 Route Power through Intermediate Power Supply Box 21
2.6 Attach Pendant Arm to Power Supply Box 25
2.7 Make Connections in Power Supply Box 26
2.8 Installing the VG4-A-ARMPLATE 28
2.8.1 Attach the Pendant Arm to the Mounting Plate 29
2.8.2 Route and Connect Wires to a Power Supply Box 30
2.9 Assemble Pendant in Packing Box 32
2.10 Attach Pendant to Arm and Tighten 34
2.11 Installing the Pressurized Environmental Housing 36
2.11.1 Important Installation Safeguards 36
2.11.2 VG4 Pressurized Environmental Housing 36
2.11.3 VG4 Pressurized Environmental Mounting Options 37
2.11.4 Required Equipment 38
2.11.5 Attaching the Housing to the Arm 39
2.11.6 Calibrating the Pressure Sensor 40
2.11.7 Attaching the Bubble to the Housing 42
2.11.8 Pressurizing the Housing 44
2.11.9 Servicing the VG4 Pressurized Environmental Housing 44
3 Installing Roof Parapet and Pipe Mounts 45
3.1 Unpacking 45
3.1.1 Parts List 45
3.1.2 Description 47
3.1.3 Tools Required 47
3.2 Pre-installation Check List 47
3.3 Mount Power Supply Box 48
3.3.1 Attach Cover Door 49
3.4 Route Wires and Attach Connectors 50
3.4.1 Wiring the Power Supply Box 52
3.4.2 Wiring the Fiber Optic Model 52