26 | English
Main Menu Sub-menu 1 Sub-menu 2 Explanation
– Off Alarm is deactivated and it will not sound.
Date & Time
Change the time and date.
Set Language
Change the display language.
Info
System status Information on battery charge, system information and operating
and charging time for the mower.
Advanced
Wire ID Change the perimeter wire ID when possible interferences are
nearby.
Sensor setting/
Lawn condition
Select between Low (uneven ground), Normal and High (slippery
ground). Mower bump sensor will become more or less sensitive
depending on lawn condition selected.
Remap Deletes the current map of the garden.
Factory Reset Reset the mower to factory settings will delete all personal set-
tings (not PIN).
After a factory reset, the mower will need to remap the the gar-
dens.
Garden overview Displays the number of mapped gardens, their size, their wire ID
and the date of the last time the garden was cut.
Delete garden Delete one specific garden map or select to delete all maps at
once.
Name mower Change the name shown in the display. Only letters of the Latin al-
phabet are possible. The number of letters is limited. This function
is not available in every language.
In some languages (e.g. Czech or Polish) a name change doesn't
have effect on display due to specific grammar requests.
Tools
Level check Information about the ground angle of the mower. If the mower is
in the docking station and the dot on the display is not within the
indicated circle, the docking station must be repositioned in a
new, more level location.
Wire signal Detects the wire signal received from the perimeter wire, indicat-
ing its strength (for Service Agent).
The mower will not receive any wire signal while in the docking sta-
tion.
Troubleshooting
F 016 L81 848 | (01.10.2018) Bosch Power Tools
To Next Page
Loading...
