Bosch IndraControl PR21 - 6 Ambient conditions; 7 Technical data

6 Ambient conditions
Humidity 85% at 40°C (non-condensing)
Operating temperature 0 to 50 °C
Storage and transport temperature -20 to 70 °C
Shock protection IEC 60068-2-27
Overvoltage category 2
Contamination level 2, no condensation allowed
Mechanical strength IEC 60068-2-64, acceleration: 2G
Tab. 6-1: Ambient conditions
Defective product due to gases jeopardizing
functions
NOTICE
Due to the risk of corrosion, avoid sulphurous gases (e.g. sulphur dioxide (SO
2
)
and hydrogen suphide (H
2
S)). The product is not resistant against these gases.
Risk to damage the device due to external influ-
ences
NOTICE
Keep the device away from oils and emulsions.
Failure of the product due to contaminated air
NOTICE
● The ambient air must not contain acids, alkaline solutions, corrosive agents,
salts, metal vapors and other electrically conductive contaminants in high
concentrations
● The devices to be installed into the housing and installation compartments
must at least comply with the degree of protection IP 54 according to DIN EN
60529.
● The device shall be provided in a suitable fire enclosure in the end-use appli-
cation.
7
Technical data
PR2100
CPU Intel Atom Single Core E3815
1.46 GHz
GPU Intel® HD Graphics
Memory Onboard 4G DDR3L, 1066 MHz RAM
6/29
Technical data
IndraControl PR21 Embedded Automa-
tion Computer
Bosch Rexroth AG R911389662_Edition 02