English – 9
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Range
AMM
PMWH
MIN
MPH
KM
/H
RESET
The following options are available for switching off
the eBike:
– Press the on/off button of the on-board computer.
– Switch off the eBike battery using its on/off button
(bicycle manufacturer-specific solutions are possi-
ble when there is no access to the eBike battery on/
off button; see the bicycle manufacturer operating
instructions).
– Remove the on-board computer from its holder.
If no power is drawn from the drive for about10min-
utes (e.g. because the eBike is not moving) and no
button is pressed on the on-board computer or the
operating unit of the eBike, the eBike will switch off
automatically.
eShift (optional)
eShift is the integration of electronic gear-shifting
systems into the eBike. The eShift components are
electrically connected to the drive unit by the manu-
facturer. The separate operating instructions de-
scribe how to operate the electronic gear-shifting sys-
tems.
Energy supply of the on-board computer
If the on-board computer is in the holder(4), a suffi-
ciently charged eBike battery is inserted into the
eBike and the eBike system is switched on, then the
on-board computer battery is powered by the eBike
battery.
If the on-board computer is removed from the
holder(4), the energy is supplied via an internal bat-
tery of the on-board computer. If the internal battery
of the on-board computer is weak when the on-board
computer is switched on, <Attach to bike> will ap-
pear on the text indicator(d) for 3seconds. The on-
board computer will then turn off again.
To charge the internal battery of the on-board com-
puter, put the on-board computer back in the
holder(4) (when an eBike battery is inserted in the
eBike). Switch the eBike battery on by its on/off but-
ton (see operating instructions for the eBike battery).
You can also charge the on-board computer via the
USB port. To do this, open the protective cap (8).
Connect the USB port (7) of the on-board computer
via a suitable USB cable to a standard USB charger or
the USB port of a computer (5 V charging voltage,
max. 500 mA charging current). <USB connected>
will appear on the text indicator (d) of the on-board
computer.
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Range
AMM
PMWH
MIN
MPH
KM/H
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(a)
Powering external devices from the USB
port
The USB port can be used to operate or charge most
devices that can be powered via USB (e.g. various
mobile phones).
Charging requires the on-board computer to be
mounted and a sufficiently charged eBike battery to
be inserted in the eBike.
Open the protective cap(8) for the USB port on the
on-board computer. Use the Micro A–Micro B USB
charging cable (available from your Bosch eBike
dealer) to connect the USB port of the external device
to the USB port(7) of the on-board computer.
Bosch eBike Systems 1 270 U20 XBI | (14.03.2023)
To Next Page
Loading...
