English – 18
Code Cause Corrective measures
602 Internal battery fault Restart the system. If the problem persists, contact your
Bosch eBike dealer.
603 Internal battery fault Restart the system. If the problem persists, contact your
Bosch eBike dealer.
605 Battery temperature error The battery is outside of the permissible temperature
range. Switch off the eBike system and allow the battery to
either cool down or heat up to the permissible temperature
range. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
606 External battery fault Check the wiring. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
610 Battery voltage error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
620 Charger fault Replace the charger. Contact your Bosch eBike dealer.
640 Internal battery fault Restart the system. If the problem persists, contact your
Bosch eBike dealer.
655 Multiple battery faults Switch off the eBike system. Remove the battery pack and
reinsert it. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
656 Software version error Contact your Bosch eBike dealer so that they can perform
a software update.
7xx Error relating to third-party compo-
nents
Observe the information in the operating instructions of
the respective component manufacturer.
Display is
blank
Internal fault of the on-board com-
puter
Restart your eBike system by switching it off and back on.
1 270 U20 XBI | (14.03.2023) Bosch eBike Systems
To Next Page
Loading...
