823_58300000113594_ara_en_u – 26.03.2015 Seite 37 von 50
6.18.4 Carrying out the sanitisation
Exposed live parts
Risk of death due to electric shock
► Disconnect the appliance from the mains.
► Use the current-operated circuit breaker if live tests are
required.
► Do not touch the housing, frame, or components.
► Ensure that the resistance of the earthing conductor does not
exceed the standardised value.
Injuries may be caused by liquid spraying out
► After finishing the sanitation work, empty the pressure tank
completely and depressurise it.
Any microbiological substance in the water filter is not
sufficiently removed by sanitisation
► Before sanitisation, replace the filter with a bypass.
► After sanitisation, replace with a new filter.
The microbiological substance is not sufficiently reduced in
the water system
To successfully sanitise the appliance, all quantity and time
specifications must be complied with.
To Next Page
Loading...
