NL
Malfunction Possible cause Solution
Temperature indication
freezer compartment
flashes, Fig. "/4
To switch off the alarm signal, press
the alarm button Fig. "/5.
The door is open.
The leg
Close the door.
Remove the cover.
The alarm signal can be heard.
The alarm button lights up.
Fig. "/5
vents are covered.
It is too hot in the freezer
compartment!
Danger to the
frozen foods!
There are too many
food placed in the freezer
compartment at the same time.
Do not exceed freezing capacity.
When the fault has been rectified, the
alarm indicator will go out after a while.
Temperature indication
freezer compartment
flashes, fig. "/4.
Due to a malfunction it is in
the freezer compartment has been too warm the temperature display
flashes.
After pressing the emergency call button 5 is
switched off. Fig. "/4
The temperature display shows for
5 seconds to the warmest temperature that
in the freezer compartment.
The appliance does not cool,
the temperature display and
the lighting are on.
The presentation light
is enabled.
Alarm button, pic"/5, during
Press and hold for 10 seconds until a
confirmation tone is heard.
After a while, check whether the device is cooling.
Auto super freeze does
not turn on.
The appliance decides independently whether
automatic super freezing is required and switches
this function on or off automatically.
101
To Next Page
Loading...
