NL
Self-test device After-sales service, product/
manufacture number and
technical data
The device has an automatic self-test
program that
indicates the causes of malfunctions that
can only be remedied by the after-sales
service.
customer service
If you have any questions, are unable to
rectify a malfunction of the device yourself
or if the device needs to be repaired,
please contact our
service department.
Start self-test
1. Switch off the appliance and wait for 5
minutes.
You can solve many problems yourself
using the troubleshooting information in
these operating instructions or on our
website. If not, please contact our
service department.
2. Switch on the device and, within the
first 10 seconds, hold down the super
button, Fig. "/2, for 3-5 seconds until a
sound signal sounds.
The self-test program starts.
We always find a suitable solution and try to
avoid unnecessary visits from the service
technician.
While the self-test is running, a long
beep will sound.
When the self-test is over and you hear two
beeps, your device is OK.
We ensure that the device is repaired by
trained service technicians both within the
warranty period and after the
manufacturer's warranty has expired with
original spare parts.
If the super key flashes for 10 seconds and
5 beeps sound, there is an error. Please
contact customer service.
For safety reasons, only trained specialist
personnel may carry out repairs on the
device. The warranty claim lapses if repairs
or interventions are carried out by persons
not authorized by us, or if our devices are
provided with replacement parts, additional
parts or accessories that are not original
parts and as a result a defect is caused.
End device self-test
At the end of the program, the appliance
returns to normal operation.
102
To Next Page
Loading...
