Bosch KGN56 Series - Familiarising yourself with your appliance

en Familiarising yourself with your appliance
40
Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
▶ Install the appliance in accordance
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
1. Remove the informative material.
2. Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3. Clean the appliance for the first
time. →Page48
4.5 Connecting the appliance
to the electricity supply
1. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. →Fig.
1
/
5
2. Check the mains plug is inserted
properly.
a The appliance is now ready for
use.
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→Fig.
1
A
Refrigerator compartment
→Page45
B
Freezer compartment
→Page46
1
Lighting
2
Interior ventilation opening
3
Bottle shelf →Page41
4
Temperature controller (stor-
age container) →Page43
5
Rating plate →Page55
6
Storage container
→Page41
7
Fruit and vegetable container
with humidity control
→Page41
8
Frozen food container
→Page49
9
Screw foot
10
Control panel
11
Door storage compartment
for large bottles →Page42
Note:Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.