Bosch KTS 590 User Manual

KTS 560 / 590 (KTS 5a Series)
de Originalbetriebsanleitung
Modul für die Steuergeräte-Diagnose
en Original instructions
Module for control unit diagnosis
fr Notice originale
Module pour le diagnostic des centrales
de commande
es Manual original
Módulo para el diagnóstico de unidades
de mando
it Istruzioni originali
Modulo per la diagnosi centraline
sv Bruksanvisning i original
Modul för styrdonsdiagnos
nl Oorspronkelijke gebruiksaanwijzing
Module voor de regeleenheid-diagnose
pt Manual original
Módulo para a diagnose de unidades
de comando
fi Alkuperäiset ohjeet
Moduuli ohjainlaitediagnoosiin
da Original brugsanvisning
Modul til styreenhedsdiagnose
no Original driftsinstruks
Modul for styreenhet-diagnose
pl Oryginalna instrukcja eksploatacji
Moduł do diagnostyki sterowników
cs Původní návod k používání
Modul pro diagnostiku řídicích jednotek
hu Eredeti használati utasitás
Vezérlőegység diagnosztikai modul
hr Originalne upute za rad
Modul za dijagnozu upravljačkih
uređaja
ro Instrucţiuni originale
Modul pentru diagnoza unităţilor de
comandă
tr Orijinal işletme talimatı
Kontrol üniteleri arıza teşhisi için
modül
ru Pуководство по эксплуатации
Модуль диагностики блоков
управления
bg Оригинална инструкция
Модул за диагностика на
управляващи блокове
el Πρωτότυπο εγχειρίδιο χρήση
Μονάδα για τη διάγνωση ονάδα
ελέγχου
ja 取扱説明書の原本
コントロール ユニット診断用モジュール
sl Prevod originalnih navodil za obratovanje
Modul za diagnostiko krmilnikov
sk Originál prevádzkového návodu
Modul pre diagnostiku riadiacich
jednotiek
et Originaalkasutusjuhend
Juhtseadmete diagnostikamoodul
lv Oriģinālā ekspluatācijas instrukcija
Modulis vadības ierīču diagnostikai
lt Originali eksploatacijos instrukcija
Elektroninių valdymo blokų diagnosti-
kos modulis

Bosch KTS 590 Specifications

General

Ethernet	Yes
CAN FD	Yes
DoIP	Yes
Wireless Communication	WiFi, Bluetooth
Communication Interfaces	USB, Ethernet

Summary

Device Description

Intended Use and Functionality

Prerequisites: Hardware and Software

Details hardware, operating system, and software requirements for KTS module operation.

Scope of Delivery

System Tester

Diagnosis and Measurement Terminals

Connection Panel Overview

Status Display (LED Indicators)

Explains the function and status of each LED indicator on the KTS 560/590 device.

Operation

Connecting the KTS Module

Explains how to connect the KTS 560/590 to a PC/laptop via Bluetooth or USB.

Control Unit Diagnosis Notes

Provides voltage supply options and connection advice for control unit diagnosis.

Multimeter and Oscilloscope Usage

Highlights safety precautions and usage limits for multimeter and oscilloscope functions.

Bluetooth USB Adapter

Firmware Update Process

Details the process and requirements for updating the KTS module firmware.

Initial Commissioning

ESI[tronic] 2.0 Software Installation

Guides through the installation and licensing process for ESI[tronic] 2.0 software.

Firmware Update and Activation

Explains how to perform firmware updates and activate the KTS 560/590 using DDC software.

Troubleshooting

Diagnostic Device Not Found

Addresses issues where the diagnostic device is not detected during startup or communication.

PC/KTS Communication Errors

Provides solutions for data communication problems between the PC and the KTS module.

Control Unit Communication Failure

Troubleshoots 'No communication with control unit' error, checking adapter cable connections.

Technical Data

General Specifications

Supported Interface Protocols

Multimeter Specifications

Provides specifications for the multimeter functions, including DC measurement.

AC and Effective-Value Measurement

Resistance Measurement (CH1)

Current Measurement (Special Accessory)

Continuity Tester (CH1)

Diode Measurement (CH1)

Oscilloscope Specifications

Power Supply Unit Specifications