15
Wash Cycle Information
The cycle times in this Use and Care Manual are based on normal soil
loads and 120°F incoming water and will vary based on your actual con-
ditions.
Heavy Auto Normal Rinse
cycle time
110-135 min 105-129 min 130-135 min 9 min
water cons.
18.6-24.2 L
4.9-6.4 gal
13.1-24.5 L
3.5-6.5 gal
8.8-20.8 L
2.4-5.5 gal
4.7 L
1.2 gal
wash temp.
66-71°C
150-160°F
53-66°C
127-150°F
45-55°C
113-131°F
incoming
rinse temp.
72°C (162°F) 67°C (153°F) 69°C (156°F) incoming
Delicate
cycle time
105-110 min 90-105 min 100-120 min n/a
water cons.
18.6-24.2 L
4.9-6.4 gal
13.1-24.5 L
3.5-6.5 gal
8.8-20.8 L
2.4-5.5 gal
n/a
rinse temp.
60°C (140°F) 60°C (140°F) 60°C (140°F) n/a
Sanitize
cycle time
130-150 min 125-140 min 135-155 min n/a
water cons.
18.6-24.2 L
4.9-6.4 gal
13.6-22.6 L
3.6-6.0 gal
8.8-20.8 L
2.4-5.5 gal
n/a
rinse temp.
72°C (162°F) 72°C (162°F) 72°C (162°F) n/a
ExtraDry
cycle time
130-150 min 125-150 min 135-155 min n/a
water cons.
18.6-24.2 L
4.9-6.4 gal
13.1-24.5 L
3.5-6.5 gal
8.8-20.8 L
2.4-5.5 gal
n/a
rinse temp.
72°C (162°F) 72°C (162°F) 72°C (162°F) n/a
ExtraScrub
cycle time
125-145 min 120-145 min 145-150 min n/a
water cons.
18.6-24.2 L
4.9-6.4 gal
13.1-24.5 L
3.5-6.5 gal
8.8-20.8 L
2.4-5.5 gal
n/a
rinse temp.
72°C (162°F) 67°C (153°F) 69-72°C (156-162°F) n/a
Note: Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/
ANSI Standard for Residential Equipment for soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, to imply that all cycles have passed sanitization performance
tests.