Bosch Security Systems | 2003-09 | 3922 988 92983en
Plena Booster Amplifier | Installation and Operating Manual | en | 12
4 External settings and connections
4.1 Connect the DC supply (battery)
Figure 4.1 Figure 4.2
The booster amplifier has a 24 Vdc input (screw terminal), which you can use to connect a back up power supply,
e.g. batteries. You can earth (8) the unit to increase the electrical stability of the system.
Caution
The connection cable must have an in-line fuse. Use the type of fuse as mentioned in the illustration.