EN | 6 Bosch Security Systems | December 13, 2005
The LTC 8500 Series system contains a logging printer output port, so an inexpen-
sive RS-232 serial printer or some other form of logging software can be used to
capture log data. This provides a permanent record showing time and date of
changes to system status, such as:
•Incoming alarms
•Acknowledgment of alarms by users
•Loading sequences
•User log-on to keyboard or console port
•Console broadcast message
•Console transfer of system tables
•Activation of time event functions
•Power up reset message
The printer may also be used to provide a hard copy of all system configuration
Tab les and Sequences.
To Next Page
