Bosch LTC 8500 - Page 64

EN | 54 Bosch Security Systems | December 13, 2005
These functions are listed in the table shown below.
Fn#
Joystick
Up/Down
Joystick
Left/Right Function Description
Pass-
word
Req.
Access Level
12-78
1 n/a n/a Local keyboard test Y Y Y
2 n/a n/a Show keyboard port number Y Y Y
3 n/a n/a Select keyboard beeper ON/OFF Y Y Y
4 Up/Down Left/Right Adjust position of monitor display Y Y N
5 Brightness Msg vs. Stat Monitor display brightness / status selec-
tion
Y Y N
6 Time/Date
ON/OFF
Overlay ON/
OFF
Select monitor display option Y Y N
7 Set Select Set time Y Y N
8 Set Select Set date Y Y N
9 Set Select Set camera ID Y N N
10 n/a n/a Change user password Y Y Y Y
11 Select n/a Select time/date format Y N N
12 n/a n/a Default all monitor overlays Y N N
13 Select n/a Print configuration tables to system
printer
Y N N
14 n/a n/a Reserved - - -
15 n/a n/a Reset system Y Y N N
16 Select Enable/Disable Time event enable/disable Y N N
17 S et Select Set monitor ID Y N N
18 Select n/a Print sequence Y N N
19 Select n/a Select alarm response Y Y N N
20 Select n/a Select printer verbosity Y N N
21 Select n/a Designate alarm monitor type Y Y N N
22 Select n/a Select control code format (fixed/variable) Y N N
23 n/a n/a Display CPU software version number Y Y Y
24 Up/Down Left/Right Set positions on all monitor displays Y Y N
25 Brightness Msg. vs. Stat. Brightness/Status select on all monitor
displays
Y Y N
26 Time/Date Overlay Set display option on all monitors Y Y N
27 Keyboard
Log-in
Select Select keyboard log-in Y Y N N
28 Console
Log-in
Select Select console log-in Y Y N N
29 Default
Parameters
Select Default RS-232 parameters Y Y N N
30 Console
Parameters
Select Set console RS-232 parameters Y Y N N
31 Printer
Parameters
Select Set printer RS-232 parameters Y Y N N
32 Alarm
Parameters
Select Set Alarm RS-232 parameters Y Y Y Y
33 n/a n/a Display user number and priority Y Y Y
34 Select n/a Camera indicator Y N N
35 Camera No. Enable/Disable Controllable cameras Y N N
36 Select Enable/Dis-
able
Select crosspoint data Y N N
37 Select n/a R/D addresses mode Y N N
38 Select n/a Printer port mode Y Y N N
39 Select n/a Select DIU interface port Y Y N N