EasyManua.ls Logo

Bosch MPC-xxxx-C Series - Page 69

Bosch MPC-xxxx-C Series
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Panel Controller Diagnostics | en 69
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
Licence: Shows if a valid license key is inserted for the VAS over IP (“VA” or “OPC/VA”). If
no valid license key is available, the remaining time until the disconnection of the
connection to the VAS over IP is displayed.
Trigger configuration:
Mismatch: A VAS Virtual Trigger programmed in the FPA-5000/FPA-1200 configuration
cannot be matched to an equivalent trigger on the VAS over IP side. Please check the
mapping of the virtual VAS triggers/virtual control inputs configured in the FSP-5000-RPS
programming software and the VAS over IP configuration.
Compatibility: Shows whether the version of the connected VAS over IP is released for
the connection to an FPA-5000/FPA-1200. If a warning is displayed please check the
version of the VAS over IP.
Connection fault counter: Shows the number of connection errors to the VAS over IP
until the last reboot of the panel.
Address of VAS over IP: IP address of the VAS over IP.
Port of VAS over IP: VAS over IP port number. The default value is 9401.
To check the availability of the VAS over IP in the network, choose Send ping command to
send a ping request to the VAS over IP IP address.

Table of Contents

Other manuals for Bosch MPC-xxxx-C Series

Related product manuals