20 en | Configuration DINION inteox 7100i IR | FLEXIDOME inteox 7100i
2021-08 | V01 | DOC
User manual
Bosch Security Systems B.V.
4.4 User Apps
4.4.1 App Management
User apps are purchased from the Security & Safety Things app store, available at https://
store.securityandsafetythings.com/shop/.
Follow these steps to install or manage a user app:
1. Connect the device to Remote Portal, available at https://remote.boschsecurity.com
2. In Remote Portal, select the device to which you want to add user apps
3. In Remote Portal, navigate to your device's Installed Apps section
4. At the top of the page, enable S&ST Cloud Connection
5. At the top of the page, click the Register Device button next to S&ST App Management
Portal
6. Open the S&ST App Management portal
7. Install or manage the user app in the S&ST App Management portal
You can also install user apps offline through the Configuration Manager. To install user apps
offline, you must obtain the license and the app files from Security & Safety Things.
4.5 Camera
4.5.1 Installer Menu
Sensor mode
The Sensor mode specifies how many images per second the sensor captures and also in
what resolution it captures these images.
Image rotation
Select the required angle (0°, 90°, 180° or 270°) to output the correct image orientation.
Mirror image
Select On to output a mirror image of the camera picture.
Reboot device
Click Reboot to restart the device.
Factory defaults
Click Defaults to restore the factory defaults for the camera. A confirmation screen appears.
Allow several seconds for the camera to optimize the picture after a reset.
Restore settings
Click Restore to restore all settings, except network settings, to their defaults.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
Click Set to apply the changes.
4.5.2 Display Stamping
Various overlays or stamps in the video image provide important supplementary information.
These overlays can be enabled individually and arranged on the image in a clear manner.
The drop-down menus below allow the configuration of the individual stamping options. The
respective sample windows show a preview of the configured text and background styles.
Click Set to apply the changes.
To Next Page
Loading...
