IP Camera 200 Series Advanced Mode | en 47
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
6.4.2 Encoder Streams
Select H.264 Settings
1. Select the codec algorithm for streams 1 and 2. The
following algorithms are available
– H.264 BP+ (HW decoder)
– H.264 MP Low Latency
2. Select the default profile for streams 1 and 2 from the
eight profiles that have been defined.
The algorithm properties have the following settings:
Preview >>
Previews of streams 1 and 2 can be shown.
1. Click Preview >> to display a preview of the video for
streams 1 and 2. the current profile is shown above the
preview.
2. Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
3. Click Preview << to close the preview displays.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.
H.264 BP+
(HW decoder)
H.264 MP
Low Latency
CABAC off on
CAVLC on off
GOP structure IP IP
I-frame distance 15 30
Deblocking filter on on
Recommended for Hardware
decoders,
Divar 700 Series
Software decoders,
PTZ and rapid
image movements
To Next Page
Loading...
