66 en | AUX Commands
AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
2018.05 | 1.1 | User Manual Bosch Security Systems
12 AUX Commands
AUX Function Command Description
1 On/Off AutoPan without limits
(Continuous)
2 On/Off Auto Pan between limits
7 On/Off Run Custom Pre-Position Tour
8 On/Off Run Pre-Position Tour
18 On/Off AutoPivot Enable
20 On/Off Backlight Compensation (BLC)
50 On/Off Playback A, continuous
51 On/Off Playback A, single
52 On/Off Playback B, continuous
53 On/Off Playback B, single
54 On/Off IR mode AUX ON sets IR to Auto.
AUX OFF sets IR to OFF.
Available for AUTODOME IP 5000i IR
only.
57 On/Off Night mode IR Filter In/Out
60 On/Off On-Screen Display (OSD)
67 On/Off Focus adjust for external IR
Illuminators
80 On/Off Digital Zoom lock
88 On/Off Proportional Speed
94 On/- Recalibrate Azimuth Compass
95 On/Off Azimuth/Elevation Display
96 On/Off Compass Points Display
100 On/Off Record Tour A
101 On/Off Record Tour B
149 On/Off Turbo Mode toggle
700 On/Off Proportional speed control
adjustment
Aux On, entered repeatedly, cycles
through increasing speeds Super
Slow, Slow, Medium, and Fast.
Aux Off, decreases speeds through
the same settings.
804 On/Off Mask Calibration Procedure
1-256 Set/- Pre-position Programming
1-256 -/Shot Pre-position Recall
To Next Page
Loading...
