To Next PageTo Next Page
Need help?Do you have a question about the Bosch NPC-20012-F2 and is the answer not in the manual?
General| Model | NPC-20012-F2 |
|---|---|
| Category | Security Camera |
| Sensor Type | 1/2.8-inch CMOS |
| Resolution | 1920 x 1080 |
| Focal Length | 2.8 mm |
| Lens | Fixed |
| Aperture | F2.0 |
| Angle of View | 110° |
| Night Vision | Yes |
| Video Compression | H.264, MJPEG |
| Maximum Frame Rate | 30 fps |
| Bitrate Control | CBR, VBR |
| Audio Compression | G.711, G.726 |
| Ethernet | 10/100 Base-T |
| Operating Temperature | -30°C to 60°C |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| Effective Pixels | 2 MP |
| Night Vision Range | 30 m |
| IR Distance | 30 m |
| Protocols | IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, SMTP, NTP, UPnP, SNMP, Bonjour, 802.1x, QoS |
| ONVIF Compliance | Profile S, Profile G |
| Power Supply | 12 VDC, PoE |
| Storage | MicroSD card (up to 128 GB) |
Details the physical mounting process, including template use and screw placement for the device.
Explains microSD card slot, RJ45 Ethernet port, and +5 VDC power input, including default DHCP settings.
Introduces the IPHelper tool for device discovery and initial configuration, accessible via a specific URL.
Lists software tools like Bosch Video Client, Video Security Client, and Configuration Manager for device setup.
Outlines precautions for installation by qualified personnel and specifies requirements for the low voltage power supply unit.
Provides critical instructions on cleaning, installation location, liquid spills, power surges, controls, power source, and servicing.
