English–1
1 609 929 F02 • (04.10) T
The specifications apply for the rated voltage of [U] 230/240 V. For lower voltages and with models for specific
countries, the specifications can vary.
Please refer to the article number on the nameplate of your machine since the trade designation of individual
machines can vary.
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level: , Sound power level: .
Measuring inaccuracy K = 3 dB.
Wear ear protection!
The typical weighted acceleration is .
The machine is intended for hammer drilling in con-
crete, brick and stone. It is also suitable for drilling
without impact in wood, metal, ceramic and plastic.
Machines with electronic control and right/left rotation
are also suitable for screw driving and thread cutting.
Product Specifications
Rotary Hammer PBH 160 RE PBH 180 RE
PBH 1800 RE
PBH 200 RE PBH 200 FRE
Article number 0 603 376 86. 0 603 376 8.. 0 603 376 7.. 0 603 376 76.
Exchangeable drill chuck – – – ●
Speed control ● ● ● ●
Speed preselection ●●●●
Right/Left rotation ● ● ● ●
Rated input power [W] 500 510 530 550
Impact rate [per min] 0 ... 4800 0 ... 4800 0 ... 4800 0 ... 4800
Impact energy per stroke [J] 1.3 1.3 1.4 1.5
Nominal speed [RPM] 0 ... 1100 0 ... 1100 0 ... 1100 0 ... 1100
Tool holder SDS-plus ●●●●
Spindle collar diameter [mm] 43
(Euro-Standard)
43
(Euro-Standard)
43
(Euro-Standard)
43
(Euro-Standard)
Maximum drill diameter:
Concrete
Wood
Steel
[mm]
[mm]
[mm]
16
30
13
18
30
13
20
30
13
20
30
13
Weight in accordance with
EPTA-Procedure 01/2003 [kg] 2.0 2.0 2.0 2.1
Protection class / II / II / II / II
Noise/Vibration Information
PBH 160 RE 85 dB(A) 96 dB(A) 9 m/s
2
PBH 180 RE 85 dB(A) 96 dB(A) 9 m/s
2
PBH 1800 RE 85 dB(A) 96 dB(A) 9 m/s
2
PBH 200 RE 91 dB(A) 102 dB(A) 11 m/s
2
PBH 200 FRE 91 dB(A) 102 dB(A) 11 m/s
2
1 2
3
1 2 3
Intended Use
pbh160_bu_1609929F02_t.fm Seite 1 Dienstag, 5. Oktober 2004 11:25 11
To Next Page
Loading...
