Need help?Do you have a question about the Bosch PCM 1800 SD and is the answer not in the manual?
Basic safety precautions to reduce risk of fire, electric shock, and personal injury.
Guidelines for operating, maintaining, and caring for power tools to ensure safety.
Specific safety instructions for operating sliding mitre saws, including laser warnings.
Explains important safety symbols used in the manual, including eye, ear, and respiratory protection.
Explains laser beam warnings and general danger area warnings for hands and fingers.
Information on saw blade diameter and hole diameter requirements for proper fit.
Specifies that the power tool is for straight lengthways and crossways cuts in wood.
Lists and describes the various components and parts of the power tool.
Details technical data like article number, power, speed, cutting capacity, laser type, weight, and protection class.
Specifies the dimensions for suitable saw blades including diameter, thickness, and mounting hole.
Lists items in the delivery scope and emphasizes initial checks for functionality and damage.
Instructions for securely mounting the machine to a level and stable surface.
Covers integrated and external dust extraction, health hazards, and proper ventilation.
Step-by-step guide to safely remove the saw blade, including safety precautions.
Step-by-step guide to safely mount a new saw blade, ensuring correct direction and fit.
Instructions for securing the machine for transport and releasing it for operation.
Steps to prepare the machine for use, including extending fences, saw tables, and clamping workpieces.
How to set the horizontal mitre angle from -45° to +45° using the locking knob and scale.
How to adjust the vertical bevel angle from 45° (leftward) to 45° (rightward) using the clamping lever.
Instructions on how to start the machine using the On/Off switch and locking lever.
How to safely turn off the machine by releasing the On/Off switch.
Key advice for safe sawing, ensuring blade clearance, avoiding lateral pressure, and using straight workpieces.
Using the laser beam for precise workpiece positioning before cutting.
Safety advice on where to stand relative to the saw blade to avoid kickback.
Using the length stop for sawing multiple workpieces to the same length.
How to adjust the depth stop to create grooves or butt gaps.
Techniques for sawing profile strips or mouldings, with or without slide movement.
Precautions for sawing curved or round workpieces and securing them against slipping.
Steps to prepare the machine for transport, including securing parts and safe carrying methods.
Instructions for cleaning the power tool, ventilation slots, and laser unit for safe operation.
Information on obtaining service, repair, spare parts, and customer support.
Guidelines for environmentally friendly disposal of the machine, accessories, and packaging.
To Next Page
General
