Need help?Do you have a question about the Bosch PCM 1800 and is the answer not in the manual?
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Follow safety warnings specific to chop and mitre saws to ensure safe operation.
Memorize symbols and their meanings for better and safer tool operation.
Describes the power tool's intended stationary use for cutting wood and its capabilities.
Lists and describes the numbered components of the power tool as shown in graphic pages.
Provides technical specifications like article number, power, voltage, speed, and dimensions.
Details the required saw blade diameter, thickness, and mounting hole diameter.
Lists all parts supplied with the machine for initial operation and checks.
Lists tools not included in the delivery scope but needed for assembly and operation.
Instructions on how to mount extension bars to extend the saw table.
Guidance on screwing in the locking knob for secure workpiece clamping.
Instructions for mounting and using the dust bag for integrated dust extraction.
Information on connecting a vacuum hose for external dust extraction.
Step-by-step guide to safely remove the saw blade, including safety precautions.
Instructions for correctly mounting a new saw blade, including tooth direction.
Explains the use of the transport safety-lock for secure handling and transport.
Steps to release the machine from transport lock to working position.
Instructions on how to release the workpiece clamp after cutting.
Guide to adjust common mitre angles using table detents and lever.
Procedure to set any horizontal mitre angle using the angle indicator and locking knob.
Instructions for setting vertical bevel angles using the clamping lever and stop screws.
Details on pressing the On/Off switch to start the machine for operation.
Instructions on releasing the On/Off switch to stop the machine.
Provides essential safety and handling advice for all sawing operations.
How to use the laser beam for precise workpiece alignment before cutting.
Advises on the correct and safe standing position relative to the saw blade.
Table showing maximum workpiece dimensions for different mitre/bevel angles.
Specifies the minimum workpiece dimensions that can be safely clamped.
Describes two methods for sawing profile strips or mouldings.
Procedure to check and adjust the horizontal angle indicator for accuracy.
Guide to set and check the vertical bevel angle to 0° using angle gauge.
Instructions to align the fence correctly with the saw blade for precise cuts.
Procedure to check and ensure the laser beam aligns with the cutting line.
Steps required before transporting the power tool, including securing parts.
Guidelines for keeping the power tool and its components clean for optimal performance.
Information on sorting the machine, accessories, and packaging for recycling.
Contact information and resources for after-sales service, repairs, and spare parts.
To Next Page
General
