English | 21
Bosch Power Tools 1 609 929 L54 | (18.2.08)
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Electrical unit
2 Cable clamp
3 Air filter cover
4 SDS release button
5 Mains cable
6 Handle extension
(only for 800 ml container)
7 Screw for air-filter cover
8 Air filter
9 Spray gun
10 Suction tube with container seal
11 Container for spray material, 600 ml
Container for spray material, 800 ml*
12 Vent cover
13 Air cap
14 Union nut
15 Thumbwheel for spraying capacity
16 Trigger switch
17 Venting hose
18 Venting valve
19 Membrane
20 Nozzle
21 Nozzle seal
22 Measuring cup
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
18.02.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Fine-spray System PFS 55
Article number
3 603 B06 0..
Rated power input
W 280
Spraying capacity
g/min 0–110
Atomising output
W55
Required time for 5 m
2
paint application
min 12
Container capacity for
spray material
ml 600
Weight according to
EPTA-Procedure
01/2003
kg 1.3
Protection class
/II
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-670-001.book Page 21 Monday, February 18, 2008 2:16 PM
To Next Page
Loading...
