en Programme settings
26
0 Programme settings
Programme sett ings
Buttons Indicators/
symbols
Explanations and notifications
Note: Not all buttons and their functions can be activated in every programme. The activated settings are
illuminated particularly brightly to highlight them on the display. You can change or deactivate the activated
settings by repeatedly pressing on the relevant buttons on the display.
} (Remote Start) Pressing } (Remote Start) allows you to start the appliance
remotely via the Home Connect app or to call up the
Home Connect settings.
Enabling the appliance to be started remotely via the
Home Connect app:
Note: Remote start can only be activated if the appliance door
is closed and the appliance is connected to your home network.
■ Briefly press }.
Note: Remote start will be deactivated for safety reasons
in the following circumstances:
You open the door.
There is a power failure.
Once the programme has ended.
If you press A (Start/Pause) on the appliance.
If you briefly press } again.
If you press # to switch off the appliance.
Calling up Home Connect settings:
■ Press and hold } for at least 3 seconds.
Drying target : Select the dryness level that you require for the laundry you
need to dry.
Ò (Cupboard-dry plus) Ò Multi-layered, thick laundry that does not dry readily.
» ü (Cupboard-dry) » Normal, single-layered laundry.
ö (Iron Dry) ö Normal, single-layered laundry that still needs to be damp after
drying and is suitable for ironing or hanging up.
To Next Page
Loading...
Need help?
General
