Draining the condensation water en
45
3. Detach the condensation hose from
the socket.
Note: The appliance comes
delivered with the condensation
hose already fitted to the socket.
4. Place the condensation hose in the
"parked" position.
5. Take the drain hose from the
accessories and attach it to the free
socket, pushing it up to the stop.
6. Secure the other side of the drain
hose using the remaining
accessories, depending on the
connection situation.
Washbasin:
Siphon:
The connection point must be
secured using a hose clamp (12-
22 mm clamping range, available
from specialist retailers).
When connecting to a siphon, make
sure that the drain hose is routed at
a height of at least 80 cm, but no
more than 100 cm.
To Next Page
Loading...
Need help?
General
