Need help?Do you have a question about the Bosch PLE-1MA120-EU and is the answer not in the manual?
General| Impedance | 100 Ω |
|---|---|
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 120 W |
| Maximum input power | 180 W |
| Dynamic range (1kHz) | 93 dB |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Connectivity technology | Wired |
| Product color | Charcoal |
| Dimensions (WxDxH) | 430 x 270 x 100 mm |
| Storage temperature (T-T) | -10 - 45 °C |
| Operating temperature (T-T) | -40 - 70 °C |
Weight and Dimensions| Weight | 10500 g |
|---|
Purpose of the Installation and User Instructions for a Plena Mixer Amplifier.
Information about the availability of the Installation and User Instructions in PDF format.
Defines the target audience for these Installation and User Instructions.
Lists other relevant documentation for the Plena Mixer Amplifier.
Explains the four types of alerts used in the manual for hazards.
Explains the meaning of icons used for notes, cautions, warnings, and dangers.
Provides conversion factors for units of length.
Provides conversion factors for units of mass.
Provides conversion factors for units of pressure.
Overview of the Plena product family and its applications.
Lists the items included in the packaging for the mixer amplifier.
Detailed description of the Plena Mixer Amplifier's capabilities and features.
Details the front panel, wall panel, and rear panel controls, connectors, and indicators.
Instructions for unpacking the mixer amplifier and removing protective film.
Guidance on mounting the mixer amplifier in a 19-inch rack.
Steps to check settings and connections before powering up.
Procedure for connecting the mixer amplifier to the mains power outlet.
Details on connecting various input sources to the mixer amplifier.
Details on connecting output signals and speakers from the mixer amplifier.
Configuration options for the mixer amplifier's rear panel settings.
Procedure for powering the mixer amplifier on and off.
How to use the volume controls for microphone and line inputs.
Operations for selecting and controlling music sources, including source selection and volume.
Adjusting bass and treble for desired sound quality.
Controlling the master volume output.
Comprehensive electrical specifications including power, inputs, outputs, and performance.
Mechanical specifications including dimensions, mounting, and weight.
Environmental operating conditions such as temperature and humidity.
To Next Page