Need help?Do you have a question about the Bosch PLE-2MA240-EU and is the answer not in the manual?
General| Power Output | 240 W |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion (THD) | < 1% |
| Frequency Response | 50 Hz to 20 kHz |
| Mains Voltage | 230 V AC, 50/60 Hz |
| Power Consumption | 600 W |
| Audio Outputs | 1 x Line out |
| Protection | Short circuit |
| Mounting | 19" rack mountable |
| Input Impedance | 20 kOhm |
| Output Impedance | 8 Ohm |
Outlines the manual's purpose, target readers, and other relevant documentation.
Details alert types (Note, Caution, Warning, Danger) and their associated icons.
Overview of the Plena system family and items included in the box.
Describes the mixer amplifier's capabilities, inputs, and outputs.
Details the features and connectivity of the remote wall panel.
Instructions for unpacking the unit and optional rack installation.
Steps to verify settings and connect other equipment before powering up.
Procedure for safely connecting the unit to the mains power supply.
Guide to connecting a 24 VDC battery for backup power and internal charging.
Details connecting priority microphone, PTT, and trigger options.
Connects secondary microphone with VOX mode for automatic activation.
Connects microphones for mixing with background music.
Procedure for safely connecting emergency telephone lines via a coupler.
Connects speakers to Zone 1, Zone 2, or Call Only outputs.
Provides a dedicated music output for external devices.
Connects external sound processing equipment via insert points.
Explains DIP switch settings for chime, PTT, line, speech filter, phantom power, VOX.
Explains ducking level, chime volume, and emergency volume controls.
Sets the master output to 'line out' or 'music only'.
Guides on using pins for settings and creating custom labels for inputs/zones.
Procedure for safely switching the mixer amplifier on and off.
Adjusting sound levels for microphone/line inputs 1 through 6.
Selecting and adjusting the volume for connected music sources.
Details tone controls for optimizing microphone/line and music audio.
Routing amplifier output to loudspeaker zones 1 and/or 2.
Controlling the overall sound level for all outputs.
Details mains/battery power, consumption, and inrush current.
Covers frequency response, distortion, sensitivity, and impedance.
Specifications for RJ-45, Mic/line inputs, including functionality.
Technical details for music, emergency, loop through, and master outputs.
Details for 100V constant voltage and 8 Ohm low impedance loudspeaker outputs.
Covers physical dimensions, weight, operating temperature, and humidity.
To Next Page