To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GAM 220 MF and is the answer not in the manual?
General| Measuring Accuracy (Angle) | ±0.1° |
|---|---|
| Automatic Deactivation | Yes |
| Arm Length | 40 cm |
| Storage Temperature | -20°C to +70°C |
| Measuring Range (Angle) | 0° to 220° |
| Battery Type | 4 x 1.5V LR6 (AA) |
| Operating Temperature | -10°C to +50°C |
All instructions must be read and saved for future reference.
The measuring tool is for measuring and transferring angles, calculating mitre angles, and checking lines.
Lists numbered product features based on the illustration on the graphic page.
Describes the various indicators shown on the tool's display.
Instructions on unfolding the diagram for reference while reading the manual.
Provides specifications such as measuring range, accuracy, operating temperature, batteries, and weight.
Details on inserting or replacing the batteries, including indicators for battery status.
Instructions on how to slide and properly mount the leg extension onto the fold-out leg.
Covers initial operation, switching the tool on/off, and aligning with spirit levels.
Explains how to measure angles, transfer angles, mark angles, and store measured values.
Details on calculating the 'MTR' cutting angle for two workpieces forming an outer angle.
Instructions for calculating mitre and bevel angles for precisely joining two workpieces.
Explains how to determine the bevel angle ('BVL') for chop and mitre saws.
Guidance on cleaning the tool and procedures for repair and service.
Information on obtaining support, spare parts, and product advice.
Instructions for environmentally friendly recycling of the tool and batteries.
