To Next PageTo Next Page
Need help?Do you have a question about the Bosch GAM 220 Professional and is the answer not in the manual?
General| Hold function | Yes |
|---|---|
| Product color | Blue, Metallic |
| Measurement range | 0 - 220 ° |
| Electronics measurement accuracy (0°/90°) | 0.2 ° |
| Battery voltage | 1.5 V |
| Number of batteries supported | 4 |
Weight and Dimensions| Length | 0.4 m |
|---|
Details the purpose and application scope for GAM 220 and GAM 220 MF models.
Lists and describes the key physical components and parts of the measuring tool.
Explains the various indicators and symbols displayed on the measuring tool's screen.
Presents detailed technical specifications, operating conditions, and performance data.
Instructions for opening the battery compartment and inserting or replacing batteries.
Guides on how to attach the leg extension accessory to the fold-out leg of the tool.
Covers initial setup, protection from environment, and keeping the tool clean for optimal performance.
Details how to power the measuring tool on and off, and its automatic shut-off feature.
Explains how to use the integrated spirit levels for horizontal and vertical alignment.
Describes the function to rotate the displayed measurement value for better readability.
Explains the default mode for measuring angles and transferring them to workpieces.
Provides steps for measuring and displaying interior angles between surfaces using the tool.
Details how to use the tool to transfer measured angles to workpieces.
Instructions on how to save a measured angle value using the Hold function.
Explains how to measure angles using the leg extension for shorter contact surfaces.
Describes how to calculate cutting angles for two workpieces with the same mitre using the MTR1 button.
Explains how to calculate mitre and bevel angles for joining workpieces with multiple angles.
Details how to save the spring angle required for compound mitre calculations.
Instructions on how to measure and store the corner angle for compound mitre calculations.
Explains how to calculate and display the mitre angle for use on mitre saws.
Details how to calculate and display the bevel angle for setting saw blade incline.
Provides guidelines on how to clean and maintain the measuring tool to ensure its proper function.
Information on how to obtain after-sales support, spare parts, and customer service.
