14 | English 2 609 932 552 • 31.10.06
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Saw blade guide
2 Saw blade driving pin
3 Safety fin
4 On/Off switch
5 Thumbwheel for stroke rate preselection
6 SDS clamping lever for saw blade release
7 Saw blade
8 Saw blade guard
9 Saw blade attachment hook
10 Saw blade holder
11 Groove on the SDS lever
12 Saw blade latching cam
13 Saw blade hook
14 Cross-cutting table*
*The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60745:
Sawing wood: Overall vibrational value
a
h
=11.4 m/s
2
, uncertainty K=1.8 m/s
2
.
The vibration emission level given in
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
Technical Data
WARNING
Power tenon saw GFS 350 E
PROFESSIONAL
GFS 350 E Set
PROFESSIONAL
Article number 0 601 640 5.. 0 601 640 7..
Rated power input W 350 350
Output power W 190 190
Stroke rate at no load n
0
spm 2000–2800 2000–2800
Stroke mm 16 16
Max. cutting capacity
–Wood
– Plastic (solid material)
mm
mm
65
20
65
20
Weight according to EPTA-Procedure 01/2003 kg 1,5 1,5
Protection class / II / II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-209-001.book Page 14 Tuesday, October 31, 2006 9:58 AM
To Next Page