To Next PageTo Next Page
Need help?Do you have a question about the Bosch GTA47W and is the answer not in the manual?
Definitions of signal words and safety alert symbol for hazard identification.
Read all instructions. Failure to follow may result in serious personal injury.
Attach the upper and lower cross bars using screws and lock nuts.
Mount the wheels onto the wheel bars using flat washers and lock nuts.
Assemble linkage bars to wheel assemblies using bolts, washers, and lock nuts.
Attach linkage bars to the upper/lower cross bar assembly with bolts, washers, and lock nuts.
Attach the kick bar between the left and right wheel assemblies using bolts and star washers.
Attach the top tube bar to the upper cross bar using bolts, spacers, washers, and lock nuts.
Attach linkage bars to the top tube bar and cross bar using bolts, spacers, washers, and lock nuts.
Mount the Bosch 4100 table saw to the GTA47W stand using bolts, washers, and lock nuts.
Instructions for folding the stand upright and lowering it to the ground.
Grip handle, place foot on kick bar, pull back, and lower stand to ground.
Adjust stand height using adjustable feet by loosening/retightening wing nuts.
No user-serviceable parts. Recommend professional service by Bosch.
The tool has been properly lubricated and is ready for use.
General