Need help?Do you have a question about the Bosch GTS 254 and is the answer not in the manual?
General| Saw blade diameter | 254 mm |
|---|---|
| Saw blade bore diameter | 30 mm |
| No-load speed | 4, 300 rpm |
| Table size | 555 x 555 mm |
| Weight | 24.4 kg |
| Riving Knife | Yes |
| Blade Tilt | 45° |
Read all safety warnings, instructions, illustrations and specifications.
Keep work area clean and well lit; do not operate in explosive atmospheres.
Ensure proper plugs, avoid earthed surfaces, and protect from rain.
Stay alert, use PPE, prevent unintentional starting, dress properly.
Never place fingers near blade, feed workpiece against rotation, use push sticks.
Understand kickback causes and avoid by proper precautions.
Turn off tool for adjustments, never leave unattended, secure the saw.
Wear protective gloves, avoid HSS blades, use table insert.
For straight line cutting in wood, chipboard, fibreboard, plastic, and aluminium profiles.
How to set precise mitre and bevel angles for cuts.
Verifying and adjusting the saw's angle stops for accuracy.
Guidelines for keeping the tool clean, lubricated, and serviced.
To Next Page