To Next PageTo Next Page
Need help?Do you have a question about the Bosch GTS 10 J Professional and is the answer not in the manual?
General| Sound power level | 116 dB |
|---|---|
| Sound pressure level | 103 dB |
| Package depth | 810 mm |
| Package width | 650 mm |
| Package height | 400 mm |
| Input power | 1800 W |
Weight and Dimensions| Weight | 27000 g |
|---|
Basic safety precautions for fire, electric shock, and personal injury.
Keep area clean, avoid hazards, keep bystanders away.
Proper plug use, avoid earthed surfaces, protect from water.
Stay alert, use PPE, prevent unintentional starting.
Proper tool operation, maintenance, and cutting tool care.
Professional servicing with identical replacement parts.
Specific safety rules for table saw operation.
Ensure clear area, use guides, proper workpiece handling.
Handling hot blades, insert plates, and checking cables.
Visual indicators for safety actions like wearing protection.
Guidelines for proper disposal of power tools.
Important dimensions and limitations for saw blades.
Describes the machine's purpose and cutting capabilities.
Overview of the machine's components with numerical references.
Detailed breakdown of numbered parts and their functions.
Key technical parameters like power, speed, dimensions, and weight.
Specifications for suitable saw blades.
A-weighted noise levels and hearing protection advice.
Statement of compliance with relevant standards.
List of parts included in the product package.
Instructions for attaching standard accessories to the housing.
Steps for installing the insert plate into the tool basin.
Procedure for attaching the blade guard and riving knife.
How to position and secure the parallel guide.
Steps to attach the auxiliary guide to the parallel guide.
Instructions for inserting the angle stop into the guide grooves.
Importance and method of dust extraction.
Connecting vacuum cleaners for dust collection.
How to secure the machine to a surface or stand.
Safety and procedures for replacing the saw blade.
Detailed steps for taking off the saw blade.
Step-by-step guide for installing a new saw blade.
General advice before starting operation.
How to set the saw blade for transport and use.
Procedure for setting bevel angles.
How to set the angle stop for mitre cuts.
Extending the saw table for larger workpieces.
Setting the parallel guide for accurate cuts.
Mounting and adjusting the auxiliary guide.
How to adjust the riving knife for safety and performance.
Steps to safely begin operating the machine.
Procedures for turning the machine on and off.
How the machine behaves during and after power interruptions.
General tips for safe and effective sawing.
Recommended stance to avoid kickback.
Guide for performing straight cuts.
Guide for performing cuts at bevel angles.
How to verify and adjust machine alignment.
Adjusting factory stops for 0° and 45° bevels.
Checking and adjusting blade parallelism to guide grooves.
Fine-tuning parallelism of the saw blade.
Adjusting the indicator for parallel guide clearance.
Adjusting the lens for accurate readings.
Ensuring the insert plate is flush with the table.
Keeping the tool clean and in good working order.
Recommended lubricants and application points.
List of optional accessories with part numbers.
Contact information for service and support.
Proper procedures for recycling and disposing of the tool.
