To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GLM40 and is the answer not in the manual?
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Class | 2 |
| Laser Diode | 635 nm, < 1 mW |
| Power Supply | 2 x 1.5 V LR03 (AAA) |
| Dimensions | 105 x 41 x 24 mm |
| Protection Class | IP54 |
| Measuring Time, Typical | 0.5 s |
| Measuring Time, Max. | 4 s |
| Automatic Deactivation | 5 min |
| Units of Measurement | m/cm, ft/inch |
| Measuring Range | 0.15 – 40 m |
| Display | Illuminated |
| Battery Life | Up to 5, 000 measurements |
| Storage Temperature | -20°C to +70°C |
Describes the purpose and application of the measuring tool.
Lists and identifies the physical components and parts of the measuring tool.
Explains the icons and information displayed on the tool's screen.
Details on how to install and replace the tool's batteries.
Initial steps for using the tool, switching on/off, and using main buttons.
Introduces the different measurement modes available on the tool.
Explains how to perform length, area, volume, and Pythagoras measurements.
Covers saving, displaying, and deleting stored measurement data.
Details adding/subtracting values, changing units, and sound settings.
Information about the screen backlight behavior and power saving.
Basic guidelines and recommendations for using the tool correctly.
Discusses environmental and surface influences on measurement accuracy.
Steps to verify the tool's measurement accuracy.
Troubleshooting common error indicators and their corrective measures.
Guidelines for keeping the tool clean and in good working condition.
Information on customer service, repairs, and spare parts availability.
