English | 17
Bosch Power Tools 1 609 92A 2CL | (31.8.16)
Maintenance and Cleaning
For safe and proper working, always keep the machine
and ventilation slots clean.
In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a portable residual current device (PRCD). When
working metals, conductive dust can settle in the interior of
the power tool. The total insulation of the power tool can be
impaired.
Please store and handle the accessory(-ies) carefully.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Drilling tiles, preparation 7 262
Mounting the quick-clamping
nut
8 262 – 263
Dismounting the quick-
clamping nut
9 263
Switching On and Off 10 264
Adjusting the speed
preselection
11 265
Rotating the Machine Head 12 266
Working effectively with the
angle grinder
13 267
Grey-marked area: Handle
(insulated gripping surface)
14 267
Selecting the admissible
grinding tool
15 268
Selecting Accessories – 269 – 270
Action Figure Please observe Page
OBJ_BUCH-1660-006.book Page 17 Wednesday, August 31, 2016 4:25 PM
To Next Page
Loading...
