Bosch Professional GWS 22-180 P - Page 19

English | 19
Technical data
Angle grinder GWS 20-230 P GWS 20-230 J
Article number
3601HC11.. 3601HC13..
Rated power input W 2000 2000
Rated speed min
-1
6500 6500
Max. grinding disc diameter mm 230 230
Grinding spindle thread M 14 M 14
Max. thread length of grinding
spindle
mm 25 25
Restart protection – ●
Starting current limitation – ●
Weight according to EPTA-Procedure 01/2014
– with low-vibration auxiliary handle kg 5.5 5.5
– with standard auxiliary handle kg 5.4 5.4
Weight (net)
A)
kg 4.6 4.6
Protection class
/ II / II
A)
Measured without protective guard or auxiliary handle
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Only for power tools without starting current limitation: Switching these on causes the voltage to drop briefly. Interference
with other tools may occur in the event of unfavourable conditions in the electricity supply. Malfunctions are not expected if
the impedances in the electricity supply are below 0.11 ohms.
Angle grinder GWS 22-180 P GWS 22-230 P GWS 22-180 J GWS 22-230 J
Article number
3601HC01.. 3601HC11.. 3601HC03.. 3601HC13..
Rated power input W 2200 2200 2200 2200
Rated speed min
-1
8500 6500 8500 6500
Max. grinding disc diameter mm 180 230 180 230
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding
spindle
mm 25 25 25 25
Restart protection – – ● ●
Starting current limitation – – ● ●
Weight according to EPTA-Procedure 01/2014
– with low-vibration auxiliary handle kg 5.3 5.5 5.3 5.5
– with standard auxiliary handle kg 5.2 5.4 5.2 5.4
Weight (net)
A)
kg 4.6 4.6 4.6 4.6
Protection class
/ II / II / II / II
A)
Measured without protective guard or auxiliary handle
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Only for power tools without starting current limitation: Switching these on causes the voltage to drop briefly. Interference
with other tools may occur in the event of unfavourable conditions in the electricity supply. Malfunctions are not expected if
the impedances in the electricity supply are below 0.11 ohms.
Bosch Power Tools 1 609 92A 6SG | (05.08.2021)