Bosch PRP6A6D70R - User Manual

Other manuals for Bosch PRP6A6D70R

Questions and Answers

K
Kevin LeeSep 12, 2025
What does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Kitchen Appliances?
- J
  Jessica DudleySep 12, 2025
  If your Bosch Kitchen Appliance displays 'OVERLOAD SCALE' or 'UNDERLOAD SCALE', it means the measurement is outside the scale's range (-990 g to 5000 g). Do not add more than 5000 g or remove more than 990 g of ingredients.
D
Derek RichAug 25, 2025
Why is the water not draining from my Bosch Washer/Dryer?
- D
  David WongAug 25, 2025
  The water might not be draining from your Bosch Washer/Dryer because the drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose to resolve this. Another possible reason is that the drain pipe or water drain hose is caught or jammed; ensure that they are not kinked or trapped. Also, check that the pump cap is fully screwed in, with the handle in a vertical position.
A
Ashlee BishopAug 25, 2025
What to do if the Bosch Washer/Dryer programme does not start?
- A
  Andre ToddAug 26, 2025
  If the programme on your Bosch Washer/Dryer isn't starting, make sure that you have pressed the start button. Also, check that the door is fully closed and that the childproof lock is deactivated. Ensure that the 'Finish in' option is not activated and that no laundry is caught in the door.
D
dtylerSep 23, 2025
How to troubleshoot a Bosch Kitchen Appliance when nothing is shown on the display and the illuminated ring is off?
- H
  Haley ElliottSep 23, 2025
  If nothing is shown on the display and the illuminated ring is off, it means the appliance has no power supply. Check the power supply by plugging the mains plug into the mains.
H
Heather KellySep 13, 2025
What to do if my Bosch Kitchen Appliances shows 'OVERLOAD' or 'UNDERLOAD' when using SensorControl Plus?
- C
  Cassidy BlackburnSep 13, 2025
  If your Bosch Kitchen Appliance shows 'OVERLOAD' or 'UNDERLOAD' while using SensorControl Plus, it indicates that too much or too little of the ingredients was added for the selected program. Add ingredients according to the specified quantities.
B
Bobby RobertsSep 18, 2025
What to do if my Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE'?
- E
  Elizabeth GillSep 18, 2025
  If your Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE', it means the scale is switched on while the appliance is running. To resolve this, switch the appliance off and wait until it stops before using the scale.
J
Jeremy ThomasSep 5, 2025
How to fix Home Connect if it is not working properly on my Bosch Washer/Dryer?
- J
  Jeffrey ChristianSep 5, 2025
  If Home Connect is not working properly on your Bosch Washer/Dryer, it could be due to several reasons. If there is no connection to the home network, go to www.home-connect.com. If Wi-Fi is switched off, activate Wi-Fi on the appliance. If Wi-Fi is activated but a connection to your home network cannot be established, ensure that the home network is available and reconnect the appliance to the home network.
J
johnathanwilliamsSep 7, 2025
What to do if my Bosch Kitchen Appliances switches off during use?
- M
  Melissa WareSep 7, 2025
  If your Bosch Kitchen Appliance turns off during use, it could be due to several reasons. First, too much food may have been processed at once or for too long. To fix this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and let the appliance cool down. Second, the swivel arm may have been opened. To resolve this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks. Finally, the bowl or bevel gear might be loose. To correct this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear, ensuring the locking lever is completely closed.
C
clarence93Sep 19, 2025
Why won't the swivel arm on my Bosch Kitchen Appliance open?
- J
  jesse97Sep 22, 2025
  The swivel arm on your Bosch Kitchen Appliance may not open because an accessory is fitted to the red rear drive. To open it, remove the accessory, press the release button, and then open the swivel arm.
N
nhuangAug 30, 2025
Why is my Bosch Washer/Dryer water pressure low?
- B
  Brandon LopezAug 30, 2025
  Low water pressure in your Bosch Washer/Dryer could be due to a few reasons. Try cleaning the water inflow filter. Also, make sure that the tap is turned on and that the water inlet hose is not kinked or jammed.

This document describes the Bosch Built-in Gas Hob, models PRP6A6D70, PRP6A6N70, and PRR7A6D70, providing essential information for its use, maintenance, and safety.

Function Description

The Bosch Built-in Gas Hob is designed for cooking purposes in private households and domestic environments. It features multiple gas burners with varying power outputs, controlled by individual knobs. The appliance includes an automatic ignition system for convenient startup. A key safety feature is the thermocouple, which interrupts gas flow if a burner accidentally goes out. Some models are equipped with a dual-wok multi-crown burner, allowing independent regulation of inner and outer flames for precise cooking. The hob also includes a main switch to lock the hob, preventing accidental ignition and allowing for quick shutdown of all burners.

Important Technical Specifications

The hob models feature different burner types with specific power outputs:

Economy burner: 1.10 kW
Standard-output burner: 1.90 kW
High-output burner: 2.80 kW
Dual-wok multi-crown burner: 4.00 / 4.20 kW

The control knobs allow for incremental flame height adjustment from power level 1 to 9. For dual-wok burners, specific power levels (e.g., 60, 4, 3, 10) regulate combinations of inner and outer flames. The appliance is designed for use up to an altitude of max. 2000 m above sea level. Product information according to (EU) 66/2014, including energy efficiency data, is available on the product page.

Usage Features

Control and Ignition:

Control Knobs: Used to configure all functions and set flame height. Press and turn anti-clockwise to ignite.
Automatic Ignition: Press and hold the control knob for the selected burner, turning it anti-clockwise to the highest level. Sparks are generated, and the flame ignites. Continue holding for a few seconds to activate the safety system.
Manual Ignition: In case of a power cut, burners can be lit manually by holding a lighter or flame against the burner while pressing and turning the control knob.
Switching Off: Turn the control knob clockwise to the "Off" position (O). A residual heat indicator (h or H) may appear in the display, indicating hot parts.
Main Switch: This switch interrupts the general gas flow. Pressing it locks the hob and switches off all active burners. To unlock, press and turn it fully clockwise.

Cookware:

Suitable Diameter: Use cookware with a base diameter appropriate for each burner to ensure efficiency and safety.
- Multi-crown burner: 22-30 cm
- High-output burner: 20-26 cm
- Standard-output burner: 14-22 cm
- Economy burner: 12-16 cm
Placement: Cookware should be placed correctly on the pan supports, centered on the burner. Never place cookware directly on the burner.
Dual-Wok Burner: Only use cookware with a rounded base on the multi-crown burner, along with the additional wok grid.
General Advice: Use cookware with a thick, flat base. Avoid deformed cookware. Cover saucepans with lids to save energy.

Cooking Settings:

The manual provides recommended power levels for various cooking tasks, from boiling water and deep-fat frying to simmering and melting.
Tips for energy-saving cooking include choosing appropriate burner sizes, covering pans, and using pressure cookers.

Safety:

Gas Leaks: Immediately shut off gas supply, extinguish flames, avoid electrical switches, open windows, and call service if gas is smelled.
Ventilation: Ensure adequate kitchen ventilation, especially during intensive or prolonged use of the gas hob, to manage heat, moisture, and combustion products.
Fire Risk: Never leave hot oil or fat unattended. Do not use water to extinguish grease fires; instead, cover with a lid or fire blanket. Keep flammable objects away from the hob.
Burns: Accessible parts become hot during operation. Keep small children away. Never heat empty cookware.
Hob Covers: Do not use hob covers.
Ignition Safety: If a burner does not ignite within 10 seconds, turn the control knob to "Off" and ventilate the room. Do not attempt to re-ignite for at least one minute.
Control Knob Issues: If a control knob is stiff or loose, contact after-sales service.
Glass Surface: In case of cracks or fractures in the glass, immediately switch off all burners and electrical heating elements, disconnect power, shut off gas, and contact customer service.

Maintenance Features

Cleaning:

General Cleaning: Allow the appliance to cool down. Clean with a sponge and soapy water, then dry with a soft cloth. Remove spilled liquids immediately to prevent food from sticking.
Burners: Clean burner parts after each use with a non-metallic brush and soapy water. Do not clean burner parts in a dishwasher. Ensure burner holes and grooves are clean for a correct flame.
Pan Supports: Allow to cool, then carefully remove and clean with a non-metallic brush and soapy water. Pay attention to rubber pads. Pan supports can also be cleaned in a dishwasher using recommended cleaning agents.
Ignition Plugs: Clean regularly with a small, non-metallic brush. Avoid heavy knocks.
Control Knobs: Do not remove control knobs while cleaning to prevent humidity damage to the appliance's interior.
Cleaning Products: Use suitable cleaning products; avoid harsh, abrasive detergents, steel wool, knives, sharp objects, or steam-cleaning appliances.

Troubleshooting:

The manual provides a troubleshooting guide for common malfunctions such as impaired electrical operation, automatic ignition not working, non-uniform burner flame, gas supply issues, burner switching off prematurely, and display errors.
Solutions include checking circuit breakers, connecting power, cleaning burner parts, and ensuring correct positioning of components.
For persistent issues or damaged components (e.g., power cord, gas lines), contact trained specialist staff or customer service.

Disposal:

Packaging: Packaging materials are environmentally compatible and recyclable. Sort individual components by type.
Old Appliance: Unplug, cut the power cord, and dispose of the appliance in an environmentally friendly manner. The appliance is labeled according to European Directive 2012/19/EU (WEEE) for proper return and recycling.

Customer Service:

Function-relevant genuine spare parts are available from Customer Service for at least 10 years.
Contact Customer Service for expert advice, problem resolution, or repairs. Provide the product number (E-Nr.) and production number (FD), found on the rating plate or appliance certificate.