To Next PageTo Next PageWhat does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Kitchen Appliances?
If your Bosch Kitchen Appliance displays 'OVERLOAD SCALE' or 'UNDERLOAD SCALE', it means the measurement is outside the scale's range (-990 g to 5000 g). Do not add more than 5000 g or remove more than 990 g of ingredients.
Why is the water not draining from my Bosch Washer/Dryer?
The water might not be draining from your Bosch Washer/Dryer because the drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose to resolve this. Another possible reason is that the drain pipe or water drain hose is caught or jammed; ensure that they are not kinked or trapped. Also, check that the pump cap is fully screwed in, with the handle in a vertical position.
What to do if the Bosch Washer/Dryer programme does not start?
If the programme on your Bosch Washer/Dryer isn't starting, make sure that you have pressed the start button. Also, check that the door is fully closed and that the childproof lock is deactivated. Ensure that the 'Finish in' option is not activated and that no laundry is caught in the door.
How to troubleshoot a Bosch Kitchen Appliance when nothing is shown on the display and the illuminated ring is off?
If nothing is shown on the display and the illuminated ring is off, it means the appliance has no power supply. Check the power supply by plugging the mains plug into the mains.
What to do if my Bosch Kitchen Appliances shows 'OVERLOAD' or 'UNDERLOAD' when using SensorControl Plus?
If your Bosch Kitchen Appliance shows 'OVERLOAD' or 'UNDERLOAD' while using SensorControl Plus, it indicates that too much or too little of the ingredients was added for the selected program. Add ingredients according to the specified quantities.
What to do if my Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE'?
If your Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE', it means the scale is switched on while the appliance is running. To resolve this, switch the appliance off and wait until it stops before using the scale.
How to fix Home Connect if it is not working properly on my Bosch Washer/Dryer?
If Home Connect is not working properly on your Bosch Washer/Dryer, it could be due to several reasons. If there is no connection to the home network, go to www.home-connect.com. If Wi-Fi is switched off, activate Wi-Fi on the appliance. If Wi-Fi is activated but a connection to your home network cannot be established, ensure that the home network is available and reconnect the appliance to the home network.
What to do if my Bosch Kitchen Appliances switches off during use?
If your Bosch Kitchen Appliance turns off during use, it could be due to several reasons. First, too much food may have been processed at once or for too long. To fix this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and let the appliance cool down. Second, the swivel arm may have been opened. To resolve this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks. Finally, the bowl or bevel gear might be loose. To correct this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear, ensuring the locking lever is completely closed.
Why won't the swivel arm on my Bosch Kitchen Appliance open?
The swivel arm on your Bosch Kitchen Appliance may not open because an accessory is fitted to the red rear drive. To open it, remove the accessory, press the release button, and then open the swivel arm.
Why is my Bosch Washer/Dryer water pressure low?
Low water pressure in your Bosch Washer/Dryer could be due to a few reasons. Try cleaning the water inflow filter. Also, make sure that the tap is turned on and that the water inlet hose is not kinked or jammed.
General