To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSB 750 RCE and is the answer not in the manual?
General| Reverse | Yes |
|---|---|
| Chuck type | Keyless |
| Torque (max) | 10 N⋅m |
| Idle speed (max) | 3000 RPM |
| Sound power level | 111 dB |
| Sound pressure level | 100 dB |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 48000 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 12 mm |
| Vibration level (metal drilling) | 5 m/s² |
| Drilling diameter in concrete (max) | 14 mm |
| Input power | 750 W |
| Output power | 400 W |
| Power source | AC |
| Product color | Black, Green, Red |
| Uncertainty K | 1.5 m/s² |
Weight and Dimensions| Weight | 1800 g |
|---|
Covers work area, electrical, personal safety, and power tool use/care to prevent injury.
Specific safety precautions for drilling operations, including hearing protection, handling, and workpiece security.
Machine is for impact drilling in brick, concrete, stone; drilling in wood, metal, plastic; screwdriving and thread-cutting.
Lists and numbers product features corresponding to machine illustration.
Details specifications for PSB 650 RE, PSB 6500 RE, PSB 650 RA, PSB 750 RCE, PSB 750 RCA models.
Presents measured noise and vibration levels for different applications according to EN 60745.
States product conformity with relevant EU directives and standards.
Details on dust extraction setup, mounting, cleaning, and safety for PSB 650 RA/PSB 750 RCA.
Procedure for changing tools in the keyless chuck for PSB 750 RCE/PSB 750 RCA models.
Procedure for changing tools in the keyless chuck for PSB 650 RE/PSB 6500 RE/PSB 650 RA.
Guidance on using screwdriver bits and setting the selector switch for driving screws.
Instructions for removing and mounting the drill chuck for specific models.
Instructions for removing and mounting the drill chuck for specific models.
Notes on matching mains voltage and starting the power tool.
How to change the rotational direction using the dedicated switch.
Instructions for setting the selector switch for drilling, impact drilling, or screwdriving.
Procedure for starting, locking on, and switching off the power tool.
How to adjust speed/impact rate using the On/Off switch or preselection thumbwheel.
Guidelines for safe maintenance, cleaning, and servicing by authorized centers.
Information on obtaining support, spare parts, and customer service.
Instructions for proper disposal of the machine, accessories, and packaging for recycling.
