What to do if no displays light up on my Bosch PUG61KAA5E?
If no displays light up on your Bosch Hob, it could be due to a disconnected power supply. Check other electrical appliances to see if there's a power failure. It's also possible that the hob hasn't been connected according to the circuit diagram; ensure it's properly connected. If neither of these resolves the issue, it might be an electronics fault.
Why are the displays flashing on my Bosch PUG61KAA5E Hob?
If the displays on your Bosch Hob are flashing, it could be due to several reasons. The control panel might be wet or covered by an object; in this case, dry the panel or remove the object. The electronics might have overheated, causing the cooking zones to switch off; wait for them to cool down and then touch any button. Hot cookware near the control panel can also cause this; remove the cookware. Overheated cooking zones will switch off to protect the surface; wait for them to cool before turning them back on. Continuous operation for too long can trigger the safety switch-off; touch any button to reset it. Incorrect operating voltage can also cause flashing; contact your energy supplier. Finally, incorrect connection can be the issue; disconnect the hob and reconnect it according to the...
General| Number of Burners/Zones | 4 |
|---|---|
| Width | 59.2 cm |
| Frame Type | Frameless |
| Power Levels | 17 |
| Boost Function | Yes |
| Timer | Yes |
| Child Lock | Yes |
| Type | Induction |
| Control Type | Touch |
| Ignition Type | Not Applicable |
| Material | Ceramic Glass |
| Burner Types | Induction |
| Gas Type | Not Applicable |
| Dimensions (WxD) | 592 x 522 mm |
To Next Page
