en Basic settings
24
QBasic settings
Basic settings
The appliance has various basic settings. These can be
adapted to the user's specific needs.
Display Function
™‚
Automatic childproof lock
‹ Manual*.
‚ Automatic.
ƒ Function deactivated.
™ƒ
Signal tones
‹ Confirmation and fault signals are switched off.
‚ Only the fault signal is switched on.
ƒ Only the confirmation signal is switched on.
„ All signal tones are switched on.*
™„
Display energy consumption
‹ Switched off.*
‚ Switched on.
™†
Automatically programming the cooking time
‹‹ Switched off.*
‹‚-ŠŠ Time until automatic switch-off.
™‡
Audible signal duration for the timer function
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power management function. Limiting the total power of the hob
‹ Switched off.*
‚ 1000 W minimum power.
‚. 1500 W
ƒ 2000 W
...
Š or Š. Maximum power of the hob.
™‚‚
Changing the preset heat settings for the Move function
׊ Preset heat setting for the front cooking zone.
Ù† Preset heat setting for the central cooking zone.
Ø‚. Preset heat setting for the rear cooking zone.
™‚ƒ
Checking cookware, result of the cooking process
‹ Not suitable
‚ Not perfect
ƒ Suitable
™‚„
Configure the flexible cooking zone activation.
‹ As two independent hotplates.*
‚ As a single hotplate.
* Factory settings
To Next Page
Loading...
