Bosch Rexroth 31 Series - Transport and storage; Transporting the axial piston unit; Transporting by hand

Bosch Rexroth AG, RE 95206/08.2018
22 RC10-10 Series 31 | BODAS Controller
Mating connector
Connector Kit
Mating connector sets with the following content are available under Rexroth part number R917010843 for the manual
assembly of wiring harness connectors for laboratory or small-series requirements. Machined assembly is recommended
for larger quantities.
Designation Version Part number Manufacturer Number
Contact carrier, Code C 1 928 405 063 Bosch 1
Cover Outlet right 1 928 405 069 Bosch 1
Secondary lock power 1 928 405 074 Bosch 1
Secondary lock signal 1 928 405 073 Bosch 1
Holding plate 1 928 405 067 Bosch 1
Fixing strap 1 928 401 713 Bosch 1
Contact BCB 0.6 Line cross section in mm²
0.75
Insulation diameter in mm
1.7 – 1.9
1 928 492 556 Bosch 84
Contact MQS 1.5 CB Line cross section in mm²
0.75 – 1.5
Insulation diameter in mm
1.7 – 2.4
TE 1 241 608-1 TE connectivity 6
Contact BDK 2.8 Line cross section in mm²
1.5 – 2.5
Insulation diameter in mm
2.2 – 3.0
1 928 498 057 Bosch 8
Dummy contact
BCB 0.6
1 928 405 077 Bosch 60
1)
Dummy contact
MQS 1.5-CB
1 928 405 076 Bosch 6
1)
Single wire seal for BDK 2.8 For insulation diameter in mm
2.2 – 3.0 (white)
1 928 300 600 Bosch 6
Cavity / dummy plug BDK 2.8 (clear) 1 928 300 601 Bosch 4
1)
Delivered loose in a PE bag. Not suitable for processing by
a machine.
1) Free contact chambers are to be sealed with dummy contacts to
ensure water tightness.