About this documentation 5/60
RE 92701-01-B/04.2018, A10VO, A10VSO Series 31, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• Axial piston variable pump A10VO Series 31
• Axial piston variable pump A10VSO Series 31
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
It contains important information on the safe and appropriate transport, installation,
commissioning, operation, maintenance, removal and simple troubleshooting of the
axial piston unit.
▶ Read this manual completely, in particular chapter 2 “Safety instructions” on
page 9 and chapter 3 “General notices regarding property and product
damage” on page 15 before you start work with the axial piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the order-related technical data of your axial piston variable pump
A10VO or A10VSO.
– Order confirmation
Installation drawing
Contains the outer dimensions, all connections and the hydraulic circuit diagram
for your axial piston variable pump A10VO or A10VSO.
Please request the
installation drawing
from your contact at
Bosch Rexroth.
Installation drawing
Axial piston variable pump A10V(S)O,
size 18 (A10VSO),
size 28 to 140 (A10VO)
Contains the permissible technical data.
92701 Data sheet
Axial piston variable pump A10VSO, size 18 to 140
Contains the permissible technical data.
92711 Data sheet
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements on a hydraulic fluid based on mineral oil and related
hydrocarbons for operation with Rexroth hydraulic components, and assists you in
selecting a hydraulic fluid for your system.
90220 Data sheet
Environmentally acceptable hydraulic fluids
Describes the requirements on an environmentally acceptable hydraulic fluid
for operation with Rexroth hydraulic components and assists you in selecting a
hydraulic fluid for your hydraulic system.
90221 Data sheet
Fire-resistant, water-free hydraulic fluids (HFDR/HFDU)
Describes the requirements on fire-resistant, anhydrous hydraulic fluids
(HFDR/HFDU) for operation with Rexroth hydraulic components and assists you in
selecting a hydraulic fluid for your hydraulic system.
90222 Data sheet
Fire-resistant hydraulic fluids – hydrous (HFAE, HFAS, HFB, HFC)
Describes the requirements on fire-resistant, hydrous hydraulic fluids
(HFAE, HFAS, HFB, HFC) for operation with Rexroth hydraulic components and
assists you in selecting a hydraulic fluid for your hydraulic system.
90223 Data sheet
To Next Page
Loading...
