Please observe the general safety instructions on the protection against haz‐
ardous movements chapter 2.6.2 "Protection from mechanical danger" on
page 4.
7.3 Operation
During operation, keep the ambient and operation conditions and technical
data specified in the project planning manual.
Checks during operation:
Pay attention to exceptional noise.
Pay attention to increased vibrations.
Check the motors and fan units for cleanliness.
Check the tightness of the coolant connections.
Check the monitoring devices and diagnostic / error messages of the con‐
trollers.
Decommission the drive when deviations from normal operation exist. For
further procedure refer to chapter 12 "Troubleshooting " on page 48.
38/57
Commissioning and operation
MSK Synchronous Servomotors
Bosch Rexroth AG R911325169_Edition 03
To Next Page
Loading...
