8 Then plug the iron in and heat it up again
until the remaining water has
evaporated.
Push the “clean” button a few times
more to clean the valve.
9 Unplug the iron and let the soleplate (7)
cool down. Wipe the soleplate with a
damp cotton cloth only.
C “Calc’nClean” with descaling liquid *
For deep descaling, it is recommended to
use the descaling liquid especially
developed by Bosch. This procedure should
be carried out every 3 months.
1. Fill the water tank (11) with tap water
mixed with a measure (25 ml) of the
descaling liquid (18*).
2. Then follow the procedure described
above in section “Calc’nClean” (steps 2 to
9).
The descaling liquid may be purchased
from our after-sales service or specialist
shops.
Name of accessory: TDZ1101
D anti-calc*
The “anti-calc” cartridge has been designed
to reduce the build-up of scale produced
during steam ironing, helping to extend the
useful life of your iron. Nevertheless the
“anti-calc” cartridge cannot remove all of the
scale that is produced naturally over time.
16
B O S C H
* Model dependent
To Next Page
Loading...
