702_58300000170749_ara_en_c Page 82 of 82
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
7 TECHNICAL SPECIFICATIONS
Dishwasher ratings – 120 VAC, 60 Hz, 12 A, 1450 W
Heat pump – 3-pole BLDC, 60 VAC, 150 Hz, 1200 W thick film
heater, < 80W motor, class F insulation, 5-blade impeller with
guide wheel.
Drain pump – 3-pole BLDC, 54 VAC, 55 Hz, 2500 – 3500 RPM,
0.1 - 0.32 A, 10 – 25 W, class F insulation, 9-vane impeller.
Water switch – 110 – 127 VAC, 60 Hz, synchronous, 4.8 RPM
(ccw), class E insulation.
Dispenser – 165 VDC, 2.67 kΩ (coil), 80 ml rinse-aid capacity / 1
ml per setting (1–6).
Max drain hose length – 92” (without an extension kit), 150”
(with extension kit SGZ1010UC / service # 663105)
Heating rate – 2°F / minute
Noise ratings – Dependent on model
To Previous Page
Loading...
