NL Basic settings
B
Basic settings
asis settings
B
You can set up your device according to your needs.
asis settings
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting Display text Choise Description
Water hardness H04 1 H00 - H07 Set the water softener to the water
hardness.
→"Setting water softening",
Page 23
At position H00, the water
softening is switched off.
rinse aid
lilac
r05 1 r00 - r06 Set the amount of rinse aid.
→"Amount of rinse aid
set", page 26
Switch off the rinse aid
with position r00.
Intensive drying d00 1 d00 - d01 When rinsing, the temperature is
increased, which results in better
drying results. As a result, the run
time may increase slightly.
Remark: Not suitable for
delicate items of crockery.
Switch on intensive drying "d01"
or switch off "d00".
hot water A00 1 A00 - A01 Set cold water connection or hot
water connection. Only set the device
to Hot water if the hot water is
prepared in an energetically
favorable manner and a suitable
installation is available, eg a solar
boiler with circulation pipe. The water
temperature must be a minimum of
40 °C and a maximum of 60 °C.
Switch on hot water "A01" or switch
off "A00".
1 Factory setting (may differ depending on the device type)
34
To Next Page
Loading...
