NL Cleaning and maintenance
2. Turn the coarse sieve counterclockwise
and remove the sieve system
take .
5. Clean the sieve elements under
running water.
Carefully clean the dirt edge
between the coarse and fine sieve.s Make sure that no foreign
objects fall into the pump
reservoir.
6. Assemble the screening system.
Check whether the locking lugs of
the coarse sieve are engaged.
2
7. Insert the sieve system into the
device and turn the coarse sieve
clockwise.
Check that the arrow marks are
opposite each other.
1
Cleaning spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
3. Pull the micro sieve downwards.
1. Unscrew the upper spray arm and
pull it downwards
.
1
4. Press the locking pieces together
and remove the coarse sieve
remove upwards .
2
2
1
38
To Next Page
Loading...
