EasyManua.ls Logo

Bosch SMI88TS00G - Water Softening System and Special Salt

Bosch SMI88TS00G
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Water softening system/special salt
14
--------
+ Water softening
system / special salt
Water softening system/special salt
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l) must
be softened. The water is softened with
special salt (regeneration salt) in the
water softening system
of the dishwasher. The setting and
therefore the required amount of salt
depends on the degree of hardness of
your tap water (see following water
hardness table).
Water hardness table
Timelight * On While programme is running, status
information is projected onto floor.
Infolight * On Light is projected to signal an active
cleaning cycle.
Start programme Eco 50° When switching on, the last selected
programme appears.
Tone volume * Setting 2 Volume of signal at end of programme.
Button volume Setting 2 Volume when using buttons.
Childproof lock * Off Activated child-proof lock impedes
opening of door.
Eco drying * On Door opens automatically at the end of the
programme.
Greeting On When switching on the appliance, the
brand logo can be deselected.
Factory setting Confirm/Back Resetting to the factory setting.
Setting Factory setting Infotext
by pressing Info button {
* depending on the features of your dishwasher








:DWHU
KDUGQHVV
YDOXH(
VRIW
PHGLXP
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PPROO
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
+DUGQHVV
UDQJH
KDUG
KDUG
PHGLXP
PHGLXP
VRIW

Table of Contents

Related product manuals